How to Unlock Kenmore Elite Dishwasher

How to Unlock Kenmore Elite Dishwasher - The Easy Way

Modern Kenmore Dishwashers are enhanced with a vast range of handy features and functionalities. One of these features is the Lock mode which is basically a safety function to prevent the dishwasher from starting the washing cycles on any accidental interactions. 

This safety feature is extremely useful for people having kids around the house who constantly touch and start the appliances in their range. However, if one or more control panel buttons have stopped working while the Lock mode is on, this feature can get stuck. As a result, you won’t be able to use the control panel.

Therefore, you must know how to unlock your Kenmore Elite Dishwasher to get going with your washing cycles in this situation. Here, we have provided all the necessary steps to unlock it effectively, but remember that it would be best to change the control panel if it still doesn’t work.

Related: 5 Best Dishwahsers Under $500

Table of Contents

Unlock Kenmore Elite Dishwasher - Step by Step

Step 1

The first step you need to follow is to press the “Heated Dry” or “Air Dry” button that must be situated on the control panel of your dishwasher. You need to press this button for about four seconds or until the Lock Button gets lighted up. In the display, you’ll be able to see the word “Locked.”

Step 2

Remember that while your Kenmore Elite Dishwasher is in Lock mode, it will flash four times if you press any button inside the control panel. However, even upon flashing, they won’t be able to work unless you fully unlock your dishwasher.

Step 3

Now you need to release the Lock Mode by pressing “Heated Dry” or “Air Dry” again for about four seconds. It will most likely unlock the control panel of your dishwasher, and the light will go off. But if it doesn’t work, get your dishwasher to some professional and get the control panel changed.

Try Troubleshooting the Lock Mode

When you’re pressing any button inside the control panel while the Lock mode is on, all the buttons are supposed to flash only 4 times. If you notice that the buttons are flashing continuously, it will indicate that your control panel has been stuck.

In this case, you initially need to get the control panel unstuck to release your dishwasher from the Lock Mode. It would be best to turn down the circuit breaker, or you can also turn off the main power supply to unlock the stuck buttons.

After doing so, you need to wait for at least five minutes so that the control panel gets reset. You can now turn on the power supply again or turn up the circuit breaker to get your dishwasher to working again.